Martin,
Here's a better technique that won't mark up the cap. It works on my TR6
and TR8 so I suspect it will work on the GT6. Screw in a #10 bolt into the
hole of the cap, about a 1" or so long bolt will do with a fine thread. It
will seat on the stub axle end and slowly extract the cap.
Gary
Gary
'75 TR6
'80 TR8 w/ A/C
Severn, MD
Digest
----------------
Date: Sat, 26 Feb 2011 12:22:58 -0500
From: "Martin Secrest" <moira.secrest@verizon.net>
Subject: Re: [TR] Removing Front Grease Caps/GT6?
To: "Bud Rolofson" <levilevi@comcast.net>, <triumphs@autox.team.net>
Thanks folks .. the right toothy channel lock on the lip got them off.
Harder than I remember it being, but they went back in gently ...
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|