> When bending remember same as when cutting lumber, measure twice and
> bend once!
FWIW, the Cunifer lines that Moss sells as a kit are MUCH easier to bend
(and rebend if necessary) than the original type plated steel lines. They
are also more corrosion resistant.
Only downside IMO is that they are somewhat softer and more prone to
abrasion. Plus of course the golden color isn't exactly original.
-- Randall
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|