On Monday, January 10, 2011 06:30:12 pm Don Spence wrote:
> Anyone have any experience with the brake piping from TRF as shown on
> this and previous page?
> Is it pre-bent or must you do your own shaping?
>
> recommended or not
> many thanks
> Don
>
> http://www.zeni.net/trf/webcatalog/specials7.27/index.php?menu=&page=31
Don,
I bought the 2 rear most pipes from TRF for my 4 and although they are not
pre-bent, I was able to bend them with ease using the pattern of the originals
using a pipe bending tool I got at my FAPS.
on my 72 TR6 project, I had to replace all 3 rear pieces + the 2 front pieces
and same process. Fittings are exact as original. And after bleeding, no runs,
drips or errors on either car. Very satisfied with price and quality.
The only addition I made was to paint them with silver rust-oleum paint.
I use silicone fluid.
When bending remember same as when cutting lumber, measure twice and bend
once!
Bob
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|