John,
If the distributor body popped out of the clamp around at the top of the
dist. pedestal, the clamp is probably tweaked from a previous over
tightening. If so replace or fix the clamp. Keep downwards pressure on the
dist.
whilst tightening. So much for our bay area good weather!
TR Regards,
Hardy
From: "Lee&John Howard" <leejohn7@gmail.com>
Subject: [TR] 65 TR4 Distributor issue
To: triumph list list _triumphs@autox.team.net_
(mailto:triumphs@autox.team.net)
I thought I had the engine sorted out, but no ...
<snip>
The distributor drive popped out at speed last week - exciting to stop
dead
on HW 101 north of San Francisco.
I now discover that it was never properly seated. The Drive slot is
correctMany thanks
John
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|