As were mine, I thought "What a genius to think of this"! They slipped
right in.
If your bullets are not staggered now, rather than remove and re-attach them
in the same place, re-attach them in a staggered position so it will be easy
peasy next time.
Bill Beecher
'58 TR-3A TS30766L "Tarbaby"
www.triumphowners.com/1566
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of dave1massey@cs.com
Sent: Thursday, November 25, 2010 8:31 PM
To: ahwahneetr@gmail.com; triumphs@autox.team.net
Subject: Re: [TR] TR3A control head install question
May need to stagger the bullets (if they want to be alongside each
other) to make a tighter package. Have heard of some who resorted to
removing the bullets and reattaching once the wires were thru but wouldn't
think this should be necessary for the stock tube.
I have heard that they are designed to be staggered. At least mine was.
Dave
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account:
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|