I can get my lift-a-dot fasteners on okay (not easily, but okay) this
way. However, I can see the top material starting to split at a seam on the
top right above a top bow.
-Bill in Tehachapi
--- On Wed, 11/10/10,
Wbeech@flash.net <wbeech@flash.net> wrote:
> From: Wbeech@flash.net
<wbeech@flash.net>
> Subject: Re: [TR] TR3 Top Erecting
> To: "William Brewer"
<wsb1960tr3a@att.net>
> Cc: "Triumphs" <triumphs@autox.team.net>
> Date:
Wednesday, November 10, 2010, 8:09 AM
> > Just
> curious what techniques
work for getting the top bows up on
> a TR3 top after the snaps h
>
>
>
>
Bill,
> After you set the bows, are you easily able to pull those
> last few
lift-the-dot fasteners into position?
>
> My process was pretty much the
same as yours, except from
> the opposite side. Unfortunately, the first
attempt
> this year resulted in the material splitting just above the
> LTD
fasteners. It is an old Amco top so it was
> probably it's time to go.
>
>
>
> Mobile Bill
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|