Being that it is such a PITA to revisit, you should probably just do it
right at the start. I bought a kit from KBS coatings. It had warning signs that
it bonds everything permanently. I bought the kit for motorcycle gas tanks
because our gas tanks are small and to save a few bucks. I did it last spring
sometime and the stuff still looks and works great.
I had put the MOSS slushing compound in my tank about 12 years ago, but it
flaked off and plugged up the tank discharge. I might not have prepared the
tank properly though.
I am really happy with the KBS coatings stuff.
Bill in Tehachapi
Date: Wed, 06 Oct 2010 14:37:27 -0400
From: Angelo Graham <agraham@execulink.com>
Subject: [TR] TR2/3 gas tank question
To: triumphs@autox.team.net
Message-ID: <4CACC1E7.6040508@execulink.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hello List:
Re-installing my gas tank after it has been sitting indoors for some
time. I originally had the tank cleaned at a rad shop and I sprayed the
inside liberally with engine storage spray before storing it. The tank
looked great, with no crud or rust on the inside. The tank now has a
light coat of powdery rust on some of the inside panels.
I sloshed a mixture of gasoline/varsol around the tank and it came out
rust brown. Can't see beyond the baffles in the tank, but it does look
cleaner where the solvent/gasoline washed it.
Should I expect problems from this light coating of rust? Will it
overwhelm the in-line gas line filter in short order? The rad shop
fellow said it shouldn't be a problem.
Any advice on this?
Thanks in advance.
Angelo Graham
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|