I liked Terri's comment on going slowly. Also, I didn't realize that there are
metal clips that are used to
attach the vinyl to the edges of the dash along the lower edge and glove box
area. Trial fit the speedometer and Tach units, I think the vinyl in that area
is cut flush with the holes (not wrapped around and through the hole). I have
crinkle powder coat on the instrument cluster, which is more resistant to
scratching than crinkle paint available from Moss and probably others. I used
3M glue from Lowe's and applied to both surfaces and let it get really tacky. I
applied to just the flat surfaces initally - then as Terri said do the curved
portions later - patiently doing small areas at a time. Call the Roadster
Factory if you need the clips. I couldn't find them in the catalogs either at
TRF or Moss but I think they have them. Hope this helps.
Tom
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|