In a message dated 9/9/2010 8:10:26 AM Central Daylight Time,
cfmtr3a@verizon.net writes:
> I did PC the housing - masking off the areas Dave mentioned. Powder
> coating
> is much 'smoother' than regular finishes. I had a hard time getting the
> top
> radiator hose to grip. I ended up sanding it down a bit before installing
>
> the hose. It would be much easier to do that with it off the car than on
> it. as an option you could mask off 1" or so of that outlet.
>
Good point. Plug the threaded hole for the temp gauge bulb, too.
Dave
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|