triumphs
[Top] [All Lists]

Re: [TR] Straightening coiled brake tubing.

To: Triumphs <Triumphs@autox.team.net>
Subject: Re: [TR] Straightening coiled brake tubing.
From: Geo Hahn <ahwahneetr@gmail.com>
Date: Thu, 10 Jun 2010 17:03:38 -0700
On 6/10/10, Dave1massey@cs.com <Dave1massey@cs.com> wrote:
> if you have no plans on using the original jack.  I've never used one.  I 
>never
> had one until more recently.  Not sure I would trust it.  I still don't
> have a ratchet handle for it.

If you have a flat tire on the road you may find there isn't room
under the frame for an aftermarket scissors jack or any other such
jack, whereas the thru-the-floor jack still works fine.

Some of the repro ratchet handles were problematic so I carry a
ratchet from a cheap 3/8" set -- there was a metric socket that fit
the jack nicely (13mm?).

Geo

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>