I have only used my original TR3A jack back in my college days (a long time
ago) & I remember it worked much easier than the stuff they were putting in
American iron at the time. I always thought of it the jack you use if you had
a flat tire on the road somewhere, not anything I would use at home. At home
I only use my hydraulic trolley jack.
John
On 10 Jun, 2010, at 6:02 AM, Randall wrote:
>> However you can probably skip that
>> bit especially if
>> you have no plans on using the original jack. I've never
>> used one.
>
> It actually works surprisingly well, IMO, especially when compared to a
> scissors jack. Not as good as a hydraulic trolley jack of course, but who
> wants to carry one of those out on the road? After getting an original
> jack, I promptly relegated my scissors jack to the junk box, and haven't
> used it since.
>
>> I still don't
>> have a ratchet handle for it.
>
> I didn't either, until relatively recently. However, the hex is a standard
> Whitworth size, and the force required is relatively low, so an open-end
> wrench works reasonably well. I forget the size offhand, but it's in my
> Whitworth set.
>
> Or a adjustable wrench will do, in a pinch.
>
> Personally I would not want to rule out using an original jack, but that's
> just my opinion.
>
> Randall
>
> _______________________________________________
> Triumphs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/triumphs/tr3a.60@gmail.com
>
John A. Wise
Glendale, AZ
1960 Triumph TR3A
Commission No: TS80422L
http://members.cox.net/60tr3a/
http://www.triumphowners.com/876
1977 Porsche 911S
http://members.cox.net/porsche911s/
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|