Just noticed that Moss lists the speedi sleeve in their catalog. Not
cheap at $46. Anyone know what the actual speedi sleep part number
is?
Thanks!
Brad
On Sat, May 1, 2010 at 2:46 PM, Randall <tr3driver@ca.rr.com> wrote:
>> Is there anything special that has to be done to replace the seal or
>> can I just remove the nut and flange, replace the seal, reinstall
>> flange and then torque the nut?
>
> Should be no problem on your TR4, Brad. The collapsible spacer didn't come
> in until later.
>
> However, I would examine the sealing surface of the flange carefully. If
> you can feel the groove left by the old seal with your fingernail, I would
> suggest a Speedi-sleeve.
>
> Randall
>
> _______________________________________________
> Triumphs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/triumphs/bkahler1@gmail.com
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|