> What is the purpose/function of the device in the coolant line that
> has two hose nipples. I'm assuming it's a thermal "switch" but what
> should it be hooked up to? ( 72 TR6)
Basically, it blocks the vacuum signal to the vacuum retard module, when the
engine starts to overheat. One port has a line to the vacuum retard module
on the distributor, another has a line to the carb port (under the rear carb
as I recall), and the third (if present) is left open to the air.
Here's a factory blurb with a photo & more details:
http://tinyurl.com/2el4fmz
-- Randall
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|