I would recommend the Hylomar since it has worked well on my pan gasket.
I would absolutely not use Permatex Aviation. I once spent a very long
evening on my back under a Chev 216 scraping dried Permatex Aviation off
of the bottom of the block. I wouldn't wish to do that again.
I have heard so many stories about loose strings of silicone gasket
maker plugging things up that I tend to stay away from those products.
Mike
Jeremy Kinney wrote:
> I am getting ready to install a new oil pan gasket. What would you guys
> prefer to add to the gasket? Wellseal, Hylomar, or Permatex Aviation
> Form-A-Gasket No. 3 Sealant?
>
>
>
> TIA,
>
> Jeremy
>
> '66 TR4A
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|