You must have an "inside the spring" compression tool, not an outside one
like most companies make for McPherson struts.
I have a homemade one too! Kind of like the one Randall showed.
Three-quarter inch rod stock. Works great, and I have no fears that the
threads aren't capable of handling the pressure. Remember to use double nuts
and big washers. No need to spend $45 for a $5 tool.
Johnnie
> -----Original Message-----
> From: triumphs-bounces@autox.team.net [mailto:triumphs-
> bounces@autox.team.net] On Behalf Of Bob Danielson
> Sent: Tuesday, September 22, 2009 5:36 PM
> To: triumphs@autox.team.net; 6pack@autox.team.net
> Subject: Re: [TR] [6pack] Eastwood Spring Compressor
>
> Wow.... Tough crowd ;-) <~~~~that's a wink for the emoticon impaired
> :-)
>
> I should have prefaced my post by saying that I have a homemade spring
> compressor using 3/8" Acme threaded rod & nuts and 3/16" steel plate.
> Someone on the List told me long ago to only use Acme threaded rod due
> to
> the cut of the thread and the subsequent holding power. But I bet most
> guys
> grab generic rod not knowing the risk. My intent with the post was to
> see if
> anyone thought these compressors would work as an alternative to Moss
> or
> TRF. Some guys prefer to buy ready made........ It sounds like we're
> better
> off making or using the Moss/TRF type product.
>
>
> Bob Danielson
> 1975 TR6 CF38503U
> Running w/ Throttle Body Injection
> Toyota 5 Speed & Nissan LSD
> http://tr6.danielsonfamily.org
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|