> Check the side clearances too and if necessary replace
> the rotor and pump ring.
If you do replace the rotor though, check to be sure that the new one is
pinned to the shaft. I've read several reports of replacement rotors that
were pressed onto a splined shaft, and fail quickly in use.
-- Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|