I measured my two and this is what I came up with. Roughly 42" across the
widest part of the mouth on the body and 8" tall.
One grill measures 42.5" wide (with the lip) and one measures 42.25". the
42.5" grill is 8.5" tall and the other is 8.25" tall including the lip. The
"shorter" grill is installed and some bowing may make for the shorter
measurements.
Hope this helps.
Tom
----- Original Message -----
From: "Carl TR" <cfmtr3a@verizon.net>
To: "Triumph List" <triumphs@autox.team.net>
Sent: Thursday, August 20, 2009 11:38 AM
Subject: [TR] TR3A Grill Opening
> Is there anyone that could measure the TR3A grille opening or a
> well-fitting
> Grille
> I guess at the point where the screw holes are on the 'mouth'.
>
> Widest point across the top
> Tallest point at the middle
>
> I am trying to figure out what is out of whack on mine.
>
> Thanks
> C
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|