Re: [TR] Rear leaf springs

["Randall" <tr3driver@ca.rr.com>]

> The plastic tape I like is 0.005" thick, comes on a 3 inch wide roll and
> has 1.5 mils of acrylic adhesive. It can be purchased from McMaster Carr
> (http://www.mcmaster.com/) and is part number 76445A24 (You can do a
> part number search on their site to find the tape).

Thanks for the tip, TeriAnn.  I was planning to use Teflon next time I had
my springs apart, but I'll get the UHMW PE instead.

Randall
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive