> That would work, but with 3/8" ID pipes I figure the whole thing is 5"
> long.
Yeah, mine is about that long. But there's lots of room on my TRs above the
rear axle off to the side of the differential, so it's not a problem.
Perhaps a TR6 is tighter down there.
> Not to mention all the
> adaptors to go from my standard 1/8" TR6 piping would make it even larger.
That's odd. The TR3s use 5/16" od tubing from the tank, ISTR the Stag does
too. 1/8" seems terribly small to me.
Do they no longer sell the little rubber sections with 5/16" on one end and
3/8" on the other? They used to come packaged with some brands of
Dodge/Plymouth fuel filters, so the same filter would fit cars with either
3/8 or 5/16 lines.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|