Hi Randall:
That would work, but with 3/8" ID pipes I figure the whole thing is 5" long.
Sort of huge for the simple application I had in mind. Not to mention all the
adaptors to go from my standard 1/8" TR6 piping would make it even larger.
However, I'll bet I could find a 1/8" version out there.
Cheers,
Mark
________________________________
From: triumphs-bounces@autox.team.net on behalf of Randall
Sent: Sun 21/06/2009 1:52 AM
To: triumphs@autox.team.net
Subject: Re: [TR] electric fuel valve recommendation
> Can anybody point me to a link for a good electric solenoid valve for fuel
> shutoff?
How about this one?
http://store.partsfortrucks.net/futasevanoam.html
Just cap off the "normally open" port.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|