You may be able to get the hardened and ground washers at you LFAPS. They are
usedon Chevy 350 heads.
Best regards,
Tom
> From: bob@texmog.com
> To: Triumphs@autox.team.net
> Date: Wed, 4 Mar 2009 13:43:48 -0600
> Subject: [TR] Nuts for the Head Studs TR-3
>
> I'm missing some of the nuts for the head studs on the engine I am
building
> ( with the much appreciated help of many on this list). I have some Grade
8
> nuts that I was planning on using but after reading Uncle Jacks Engine
> Rebuilding Tips I see where he recommends the use of 'Hardened and Ground'
> washers. Which got me to wondering if Grade 8 nuts also not be appropriate.
> So the question do I use Grade 8 nuts with the old washers, new grade 8
> washers and nuts or find someone who can supply hardened nuts and washers?
>
> Also if I have to get new nuts any recommendations? NWBP does not carry
> them.
>
> Thanks in advance for any help
>
> Bob Nogueira
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as tswhitez123@hotmail.com
>
> http://www.team.net/archive
_________________________________________________________________
Windows Live Contacts: Organize your contact list.
http://windowslive.com/connect/post/marcusatmicrosoft.spaces.live.com-Blog-cn
s!503D1D86EBB2B53C!2285.entry?ocid=TXT_TAGLM_WL_UGC_Contacts_032009
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|