The HS6 part in the inquiry below is NLA from MOSS or anyone else that I
can find. If I could buy one used, I might make tooling to replicate it so
other people could get HS6's on a TR3 or 6.
Bill in Tehachapi
From: William Brewer <wsb1960tr3a@att.net>
Subject: Need SU HS6 Part Measurement or the part itself
To: triumphs@autox.team.net
Date: Tuesday, January 20, 2009, 8:57 PM
I've picked up a pair of HS6's and am toying with fitting them on
my TR3A. I am missing the "U" shaped sheet metal bracket that bolts
between the carbs and holds the bell crank and spring (MOSS part # 371-900).
I
was wondering if any listers have an extra laying around that they would part
with. If not, does someone currently have their HS6 (for TR4) carb bracket
off
of their car and could they trace an outline and give me the offset
measurements
(side view) so I could fabricate my own?
Contact me off list please.
TIA,
Bill Brewer
Tehachapi, CA
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|