> I have the screen stuck to the metal part, then the rubber
> gasket, then
the glass bowl. Is that the correct order?
Yes, but there should be a lip
that the screen fits inside. The rubber
gasket should be between the flat lip
and the bowl.
As TeriAnn says, the gasket needs to be replaced every few
years;
particularly if you use the stock cork. I cut a gasket from thick
Neoprene
sheet many years ago that lasted much better for me; and the rebuild
kit I
bought recently from TRF had Neoprene (or something similar).
Randall
NAPA sells a neoprene gasket for the TR2>4A fuel pump glass sediment bowl
which seems to last and seal. It's part no: BK 730-9510, gasket - fuel bowl
strainer. I'll never use a stock cork gasket here again.
brgds, Jay
'64
Triumph TR4 since '67
Wheaton Illinois
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|