On page 22 of his tome, "More BS about TR's", Bob Schaller has a
section on an auxiliary carb return spring. The piece finishes: "The
illustration shows the simple fabrication necessary." But not in my
case; I must have a several-generations-removed-from-original copy,
because this image is largely a black blob.
I am imagining a spring attached to the backside of an air filter and
to the linkage between the carb shafts. If so, is there a piece
attached to the linkage to give the spring some leverage? Where on the
linkage does the spring act? Is it on the rear carb shaft, or the
centre section?
A clear description, or clear photo would be very welcome.
Thanks,
Brian
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|