triumphs
[Top] [All Lists]

Re: [TR] TR3A Fuel Gauge Calibration

To: triumphs@autox.team.net
Subject: Re: [TR] TR3A Fuel Gauge Calibration
From: Dave1massey@cs.com
Date: Fri, 19 Sep 2008 14:45:18 EDT
In a message dated 9/19/2008 1:04:29 PM Central Daylight Time, 
tr3driver@ca.rr.com writes: 
> I forgot to mention this earlier : What you are looking for are "carbon
> composition, 1/2 watt resistors with axial leads".  Other types will work of
> course, but are more expensive.
> 
Carbon Comp or carbon film?  Although you can get carbon comp (Mouser) carbon 
film are much more common and a bit less expensive.

Dave   
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>