Wow,
Talk about belts and suspenders!
When I was fixing my TR4A sheet metal, I would strip the part down to bare
metal, coat it with a phosphorous spray like POR-15 Metal Prep, then paint
it with epoxy primer!
Dave Connitt
'67 TR4A
http://home.fuse.net/davestr4a
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|