> The tape has a backing. If you leave it on while sticking it
> to the back of the letter, you can easily trim it with an
> Xacto Knife. Then you can peel the backing off when you get
> ready to apply the letters.
Thanks for the explanation, Joe. I thought it was something like that, but
wasn't sure. I'll try it, next time the subject comes up.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|