triumphs
[Top] [All Lists]

Re: [TR] Triumph letter mounting TR4

To: wbeech@flash.net, 308gtsi@adelphia.net, triumphs@autox.team.net
Subject: Re: [TR] Triumph letter mounting TR4
From: acekraut11@aol.com
Date: Fri, 22 Aug 2008 12:24:02 -0400
 Or, scan it with a quarter, or ruler in the scan then you can verify the 
accuracy of the final printed document.? Using this method you could also 
accomplish the same thing with a digital photo instead of a scan.

Aaron


 


Aaron Cropley
71 TR6 (Throttle Body Injection!)
http://www.triumphowners.com/108
2002 Mini Cooper S
Topsham, Maine

 


 

-----Original Message-----
From: wbeech <wbeech@flash.net>
To: 308gtsi@adelphia.net; triumphs@autox.team.net
Sent: Fri, 22 Aug 2008 12:17 pm
Subject: Re: [TR] Triumph letter mounting TR4










You can scan it in.  

Be sure to write the measurements on the paper as the scan probably will not
be to scale after it is re-printed.   If it is too big for the scanner, you
could re-draw in 1/2 scale, then scan it.

Bill B
'58 TR-3A TS/30766 L
'59 TR-3A TS/64974 LO
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"


-----Original Message-----
From: triumphs-bounces+wbeech=flash.net@autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net@autox.team.net] On Behalf Of Brian
Induni
Sent: Friday, August 22, 2008 10:06 AM
To: triumphs@autox.team.net
Subject: Re: [TR] Triumph letter mounting TR4

Frank, et all -

I have a spare TR4A trunk lid I can make a hole pattern from. Getting it
from physical paper to electronic will be my biggest challenge... any ideas?

Brian
'67 TR4a

----------------------------------------------------------------------

Message: 1
Date: Thu, 21 Aug 2008 15:56:28 EDT
From: FGFO1@aol.com
Subject: [TR] Triumph letter mounting TR4
To: triumphs@autox.team.net
Message-ID: <bc5.2f925332.35df226c@aol.com>
Content-Type: text/plain; charset="us-ascii"

I'm not sure I have the courage to try to drill such precisely placed holes,
but maybe there is a way.
 
 
I could accurately measure them and reproduce the pattern. If I had a TR4!
 
Frank Fisher
Temecula California
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>