triumphs
[Top] [All Lists]

Re: [TR] exhaust systems

To: <triumphs@autox.team.net>
Subject: Re: [TR] exhaust systems
From: "Karl Vacek" <kvacek@ameritech.net>
Date: Thu, 21 Aug 2008 09:53:44 -0500
On the original ('71 at least) TR6 muffler here's a plug on the right side
rear, opposite the inlet pipe.  That plug caps the inlet portion of the
muffler - there's a baffle pipe with holes all around it that runs from the
inlet to that plug at the rear.  If you cut out the plug and weld a 2" pipe
to the muffler right where the plug was, you'll have an open exhaust, though
with a slight resonator effect.  Putting a lakes plug on there gives you the
option of an open exhaust when you want it.

If you're adding dual pipes on that side of the muffler, if one of them goes
onto that plug it'll be pretty loud.  Even right next to it it'll be far
less baffled than the stock left side outlets.

These comments apply to the stock muffler, and direct reproductions of that
muffler.

Karl


> I've been thinking of a custom exhaust setup for my TR6 recently as  well.
> I
> have a stock muffler and always have wondered what it would look  like and
> if
> anyone has been successful with welding a pair of twin pipes to  the rear
> of
> the muffler on the passenger side (in a mirror image to what exits  from
> the
> muffler to the rear on the driver's side)....creating a  symmetrical 4
> pipe
> setup??
>
> But, Gary, good luck with your project!
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>