I have the Bell stock stainless steel system on my 1972 Triumph TR6.
The shop that installed it said it was the best fitting exhaust they
have ever mounted.
Several years later, it looks and sound like the day it was installed.
Did not want to lose that stock sound.
Craig H. Nicholls
On Wed, Aug 20, 2008 at 4:09 PM, Chip19474@aol.com wrote:
> Gary and List,
> I've been thinking of a custom exhaust setup for my TR6 recently as
> well. I have a stock muffler and always have wondered what it would
> look like and if anyone has been successful with welding a pair of
> twin pipes to the rear of the muffler on the passenger side (in a
> mirror image to what exits from the muffler to the rear on the
> driver's side)....creating a symmetrical 4 pipe setup??
> But, Gary, good luck with your project!
> Chip Krout
> Delaware Valley Triumphs, Ltd.
> Skippack, PA
> 1976 TR6 CF57822U
> In a message dated 8/20/2008 10:17:14 A.M. Eastern Daylight Time,
> nafzigerg@yahoo.com writes:
>
> Actually I'd like to make up my own system.
>
>
>
>
> **************It's only a deal if it's where you want to go. Find your
> travel deal here.
> (http://information.travel.aol.com/deals?ncid=aoltrv00050000000047)
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as thenicholls@verizon.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|