I'm wanting to turn my distributor since I'm needing to retard the timing more
and the vacuum canister is almost hitting the block. I'm assuming that I
simply need to withdraw the distributor (not loosening the clamp)........then
turning the bushing/drive in the block appropriately........then re-installing
the distributor. Am I assuming right?
gary nafziger
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|