That is what I used when I recently set the points using dwell.
FWIW I found I had to set the gap notably smaller than .015 to achieve
that dwell.
Car ran fine afterwards, ran fine before for that matter.
The smaller gap probably means I will have to keep a closer eye on it
as the gap seems to decrease over time and smaller to start with
leaves less margin for whatever causes it to decrease (probably wear
on that thingy that rides on the cam).
Geo
On 8/14/08, Brian.L.Jones@gsk.com <Brian.L.Jones@gsk.com> wrote:
> ...I found one reference to TR4, at 60 degrees(+/- 3 degrees) on a
> website I have no reason to trust.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|