Setting the breaker points' gap accurately is a little tricky, especially
for not-new contacts that exhibit pitting / build up. I have read that
correcting dwell angle is more accurate than setting points oin this way.
What would be the correct dwell angle for a TR4?
While I have found multiple references for a TR6 at 35 degrees (+/- 3
degrees). I found one reference to TR4, at 60 degrees(+/- 3 degrees) on a
website I have no reason to trust.
Could someone please confirm?
Many thanks,
Brian
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|