In a message dated 7/26/2008 6:36:49 AM Central Daylight Time,
gprtech@frontiernet.net writes:
> I just did this myself with an ordinary ball peen hammer. No sweat. I'm
> not sure why I didn't do it when I originally restored the car, but the
> 40 year old joints were all well &truly shot.
>
Sometimes you get lucky. U-joints vary widely in how difficult they are to
take apart. Sometimes they are so tight the yoke breaks before the cup lets
go. (It happens)
Dave
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|