In a message dated 7/24/2008 10:27:50 PM Central Daylight Time,
peterara@msn.com writes:
> I know this has been covered, but I can't find my notes. So could you
> folks
> refresh me on installing u-joints into the half shafts of my TR6. I know it
> involves sockets and vices (not the alcohol drinking vices), but any
> tips/methods would be very appreciated.
>
Peter, I've done this with hammers, sockets and a vice, and with sockets and
an hydraulic press. The easiest method I've found, however, is take it to a
shop and let the pro's do it.
Dave
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|