Along the same lines, I have a GT6 that I believe is running hot. I removed
the thermostat & noticed a ton of garbage in the thermostat/pump housing. The
passage over to the intake was nearly blocked with rusty metal bits. This
leads me to believe that there is other stuff in the passages that needs to
come out. I've flushed with water several times...keeping the system going
until no brown stuff came out, but more brown stuff keeps showing up. My
question is, do the chemical flushes work?
Thanks,
Todd Bermudez
68 GT6 Mk1 RHD
> From: tr3driver@ca.rr.com
> To: triumphs@autox.team.net
> Date: Thu, 17 Jul 2008 17:10:21 -0700
> Subject: Re: [TR] removing rust in block
>
>> O man, I HATE to have a different opinion than Randall!
>
> No problemo, Terry!
>
> You're right of course; it certainly wouldn't hurt anything but his
> pocketbook to have it boiled out.
>
> But I'm assuming (there's that word again) that Sujit was just wanting to
> drop this used engine in to replace the trashed one he took out; not
> undertake a full rebuild. I know that's what I would be hoping to do.
>
> Obviously it's his choice to make, I was just presenting an opposing
> opinion.
>
> Randall
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as red_tr250@hotmail.com
>
> http://www.team.net/archive
_________________________________________________________________
With Windows Live for mobile, your contacts travel with you.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|