All,
Thanks for the suggestions. Looks like a hex or socket cap screw is the
solution.
And as most of you have already guessed yes it is a TR3!
Ordering the hw from McMaster is cheaper than getting a set of special
sockets.
Thanks for all your help.
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|