Are you sure you have it wired correctly? As I recall the whole scheme
changed dramatically somewhere in the TR3 production. Many wiring diagrams
show one version of the wiring that may ro may not be correct for your car.
Without pouring over diagrams, I recall that on my 59 TR3A the hot is always
on (with the ignition) and the switch controls the ground.
Geo H
----- Original Message -----
From: <PACBURROWS@aol.com>
To: <Triumphs@autox.team.net>
Sent: Sunday, May 18, 2008 8:32 AM
Subject: [TR] Wiper motor repairs
> Good Morning
> I am looking for someone who can trouble shoot and repair my wiper motor.
> It
> was working when I bench tested it during my restoration. But when I put
> it
> on the car, NADDA! I had a very good ground and even tried using the
> battery
> directly. NADDA! Any ideas? ---any constructive ideas LOL?
> Paul
> 57 TR-3 small mouth
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|