> What happens if you use a Male British Fitting in a device intended for a
> Male SAE fitting?
The flair anchors OK but the fittings are joined by just a couple
threads. The British male thread has a long smooth nose to help align
the threads whereas the US fittings has a short nose & threads. The UK
make fitting flair is almost seated before the threads are engaged.
For the sake of those around your vehicle, please don't mix brake
fitting standards. Anyone should be freely entitled to pursue their own
Darwin award as long as they leave bystanders out of their pursuit.
Teriann
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|