Thanks Jon,
Yep, very familiar with CW...not ordered yet, but I understand the shipping
costs are silly money, but if you wanna play....
We'll see what (if anything) turns up in the states...
Cheers,
Todd> From: standardtriumph@btinternet.com> To: red_tr250@hotmail.com;
triumphs@autox.team.net> Subject: Re: [TR] Triumph 2000 trailing arms bent?>
Date: Mon, 21 Apr 2008 14:44:52 +0100> > Todd> > If you're unable to locate a
replacement arm, we've got hundreds of them lying around in the UK:) I > had
four once upon a time! Your best port of call is one Chris Witor. Looks like
the part you need > is part # 138112 or 138113- according to side if your
car's a Mk1 and not one of the Mk II's > (different #) that have snuck in over
the years. Chris has an on-line .pdf catalogue and price list > and it looks
as though one of these arms (used but he will have checked it) will cost you
about > US$30.00 plus freight. His URL is www.chriswitor.com NFI etc> >
Jonmac> > ----- Original Message ----- > From: "Todd Bermudez"
<red_tr250@hotmail.com>> To: <triumphs@autox.team.net>> Sent: Monday, April
21, 2008 2:04 PM> Subject: [TR] Triumph 2000 trailing arms bent?> > > > Anyone
ever seen a trailing arm bent? I have a '68 Triumph 2000 and while> >
replacing the trailing arm bushes(TR6 urethane bushes), we discovered the> >
outside pivot point on the trailing arm was noticeably bent inward toward the>
> other pivot point. I've NEVER seen this type of thing happen? We figured it>
> would've cracked or broken before bending. Perhaps it was cast that way? We>
> used a threaded rod from one pivot point to the other in order to draw the>
> bushes out. On the passenger side, the rod went thru the bushing tubes just>
> fine, but on the driver side it had to be driven thru. I suppose while> >
tightening the nuts on the threaded rod, we could've bent it...more than it> >
was cus it was bent already. We're guessing it was cast that way though.> >
Also while pulling the outer-most bracket (behind the 4 shims) was a large> >
hole just next to the spacer tubes. Probably going to need a trailing arm> >
section...if anyone out there has one?? Well, that and a trailing arm that's>
> NOT BENT :)> >> > Cheers,> >> > Todd Bermudez> > Cincinnati, OH> >
_________________________________________________________________> > Get in
touch in an instant. Get Windows Live Messenger now.> >
http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_Refresh_>
> getintouch_042008> > _______________________________________________> >> >
Support Team.Net http://www.team.net/donate.html> >> > This list supported in
part by the Vintage Triumph Register> > http://www.vtr.org> >> >> >
Triumphs@autox.team.net> > http://autox.team.net/mailman/listinfo/triumphs> >>
> You are subscribed as standardtriumph@btinternet.com> >> >
http://www.team.net/archive >
_________________________________________________________________
Going green? See the top 12 foods to eat organic.
http://green.msn.com/galleries/photos/photos.aspx?gid=164&ocid=T003MSN51N1653
A
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|