I have one and always use it when I adjust the valves.? Still need to verify
that the measurement is right with a feeler gauge, especially after
tightening.? I found it to be most accurate when I count the clicks to get it
spot on after tightening rather than before.
Ned Paulsen
1958 TR3
1960 Healey BN7
-----Original Message-----
From: j randolph sandner <drsandner@embarqmail.com>
To: 6pack <6pack@autox.team.net>
Cc: tr6 <triumphs@autox.team.net>
Sent: Sun, 20 Apr 2008 9:21 am
Subject: [TR] click adjust
morning all,
there was an article/reference to a new tool called ' click adjust' (i
think), used to adjust valve clearance.
ideas to info about the tool, anyone used one, rants or raves.
TIA
randy sandner
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as npaul72464@aol.com
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|