> Bob, when I put the TR4 OD in my TR3A, I removed the cross
> member, drilled 2 new holes next to the existing holes, (in
> front or behind, can't remember) and then used a cutoff wheel
> on my Dremel to join the new and old holes to make them
> slots. Worked for me.
Ditto.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|