Check with Morris at West Valley instruments: 818-758-9500 he can probably
help you out.
Bill B
'58 TR-3A TS/30766 L
'59 TR-3A TS/64974 LO
"If I wasn't working all those years, I would not be able to afford a
Triumph!
-----Original Message-----
From: triumphs-bounces+wbeech=flash.net@autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net@autox.team.net] On Behalf Of
dorpaul
Sent: Wednesday, February 27, 2008 2:30 PM
To: list Triumph
Subject: [TR] TR3 gauge bezel rubber?
I am mounting my TR3 gauges to the console panel. Originally, I believe a
rubber ring was squezed up between the chrome bezel and the metal console.
What can I use for this rubber ring?
Moss sells a 'gauge mounting ring' (280-870) for $1.95 for TR4 gauges.
Is this ring also used on TR3s? Maybe is isn't needed?
Thanks, Paul Dorsey
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as wbeech@flash.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|