Geo,
I replaced my entire 4a interior last fall and the seat backs were one of
the most frustrating pieces! I found the clips thru TRF and Moss, but since
the new panels were made of thin wood (plywood), these clips were useless. I
ended up using two small chrome screws, one in each top corner, to hold the
panel on. Kind of dress it up too, imho.
Brian
'67 4a
------------------------------
Message: 16
Date: Tue, 26 Feb 2008 20:29:06 -0700
From: "Geo & Kathleen Hahn" <ahwahnee@cybertrails.com>
Subject: [TR] TR4 Seat Back Hardware
To: "TR List" <triumphs@autox.team.net>
Message-ID: <F8DAD7609B9549CF9B0917B31C1B2122@GeoPC>
Content-Type: text/plain; charset="us-ascii"
Late TR4s (from 20877CT) have vinyl-covered masonite panels that form the
backside of the seat upright. These panels are secured by a bunch of funny
little clips. I recall that some or all of these are a type that clip on
thru
the holes in the masonite then slide (upward) into place to grip the seat
frame.
Anyone know of a source for these clips? Alternately, a part number or
other
applications might help me source a few. As a last resort there may be some
other type pf clip that works here? I have seen some seats with screws used
to secure these panels -- works but not what I want to do.
Thanks for any help.
Geo
------------------------------
_______________________________________________
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
End of Triumphs Digest, Vol 2, Issue 92
***************************************
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|