Fred (Light) asked about building a body rotisserie...
Fred,
The one I built recently for my Spridget Project should work just fine
for a TR3...I intend to use it one day on mine. The engine stands I
used are heavier than those used by some others, having four wheels
per stand instead of the usual three (I used heavier duty casters as
well).
There is a narrative and a number of photos of the rotisserie, both
during construction and in use on my web site www.raysmg.com , just
click on the "Spridget Project" link and then "Rotisserie" or you can
just click the following link:
http://www.raysmg.com/rays_mg_midget_rotisserie.htm
Hope this helps,
Ray
Ray McCaleb
ray@raysmg.com
http://www.raysmg.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|