i think you're walnut shells would be good. i used coarse ground corn cubs
with very good result. except, uh, the fuel pump i did without disassembling.
whoops <grin>
From: triumphs-bounces+wbeech=flash.net@autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net@autox.team.net] On Behalf Of Dave
Connitt
Sent: Sunday, February 03, 2008 1:05 PM
To: Triumphs
Subject: [TR] Cleaning SU carb bodies
List,
I am getting ready to rebuild a set of SU carbs that I have and have a
refinishing question.
I would very much like to get the aluminum carb bodies back to a point that
they look like new castings. By that, I mean that they will have that
"flecked" look of new castings. I am not interested in a polished look, just
very clean.
I have a blasting cabinet and am considering walnut shells or soda blasting
as a possibility.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|