> Having measured the threaded shaft, I find it to be approx.
> 7/16x32. This is a size I never heard of but I will need to
> find a tap to make the knob insert.
Likely there are cheaper sources; but McMaster-Carr carries 7/16-32 taps.
http://www.mcmaster.com/nav/enter.asp?pagenum=2345
(near the bottom, under "special thread taps")
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|