> Not all trunnions are created equal. Mt suggestion is to
> take the trunnions
> to the machine shop and work them to fit. That's what I have
> done for my
> TR3s.
BTW it's still a good idea to ream the bushings, IMO. Mine were not round
as installed, which I believe is the point of supplying them undersize.
I would be very suspicious of any trunnion that had an off-size pin ... the
pins might not be hardened in addition to not being ground to size.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|