Another subject...
While greasing my ball joints located atop the vertical link (and if viewing
the backside w/ a mirror) I could see ribbons of grease escaping at the bottom
of the new rubber boot. The vertical link squishes the rubber tight on the
outside, but a wide angle on the inside. They look installed tight and grab
correctly where they should. Unfortunately, this proably happens regardless
of front wheel direction. I'm thinking it's unavoidable...-right?
Paul
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|