Ok, Let me try again Following the advice of listers in lowering my
compression ratio by using a thicker head gasket. Current compression
is 205 lb psi . Goal is to lower ratio to reduce or eliminate
dieseling and to allow use of 87 octane gasoline. My question is what
compression ratio would that be? Thanks all, and to Dan for
suggesting gasket works.
Arnold, 1965 TR4A off the road again.
Moderation is a fatal thing... No thing succeeds like excess.
Oscar Wilde (1854 -1900)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|